4 Channel DC Energy Meter

Our 4 Channel DC Energy Meter comes with options of Shunt, Hall Effect Sensor, Split Core Hall Effect Sensor.

The device can be connected through RS485 or we can provide a complete Remote Energy Monitoring Solution.

Parameters	:	Current, Voltage and Energy for each channel of 4 channels
Accuracy	:	+/- 1% of the range for Voltage (voltage range is 20V to 70V DC). +/- 1% of the range for Current (current range is 0 to 99.9A DC). +/- 1% of the range for Cumulative Energy
Resolution	:	2 place decimal for Voltage and 1 for Current. 2 place decimal for Energy.
No. of Digits	:	3 digits for Current and Voltage.
Input Supply	:	20V to 70V DC, polarity independent
Size	:	96mm (W) x 96mm (H) x 65mm (D)
Operating Principle	:	Micro-Controller based. Real time clock incorporated
Operating Temperature	:	0 Degree C to +55 Degree C

Voltage DC	:	20v to 70v
Current DC	:	0A to 99.9A

DC Voltage:	:	20V to 70V
DC Current:	:	The four channels DC current (0 to 99.9 A) provided to sense the current.

Information displayed using LCD with back light Information displayed by automatic scrolling or manual scrolling

The DC EM communicates with other devices on a 2-wire optically isolated RS-485 link and uses the Mod bus RTU slave protocol.

Wall mounted, mounting fixture provided. Optionally rack mounting can also be provided.

NOTE: We reserve the right to revise features at any time, without any prior notice.